Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Cameron, TX

Garage Door Replacement in Cameron, TX

Old or damaged doors replaced with a new door, springs, tracks and hardware. Typical cost $1,200-$5,000.

When your door needs garage door replacement, you want it done safely and right the first time. Typical jobs in Cameron, TX cost $1,200-$5,000, and you approve the price first. Old or damaged doors replaced with a new door, springs, tracks and hardware.

Is it time for garage door replacement?

  • Repair costs approach half the price of a new door
  • Discontinued panels that can't be matched
  • Rot, rust-through or warping
  • The door is more than 20 years old and needs major work

Why this happens

  • Age and weather
  • Impact damage across several sections
  • Parts no longer available

Safe checks before you call

  • Compare the repair quote with the cost of a new door.
  • Check whether your opener is compatible or due for replacement too.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

Our garage door replacement process

  1. Price repair and replacement side by side
  2. Measure and order the new door
  3. Remove and dispose of the old door
  4. Install the new door with new springs and track
  5. Balance, seal and test

How much does garage door replacement cost?

$1,200-$5,000Typical range, parts & labor
4-8 hoursTypical time on site

What moves the price:

  • Door size and weight (single or double, steel or wood)
  • Which parts need replacing and whether they are in stock
  • Spring type and cycle rating
  • Emergency or after-hours timing

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Serving Cameron, TX and nearby towns

For Texas homes, look at insulated steel or composite doors that resist moisture, and ask whether wind-load requirements apply to your area before you choose a model.

Parts of Texas are exposed to hurricanes and tropical storms. A garage door is often the largest opening in a home, so wind-rated doors and reinforcement kits matter here, and building codes in coastal areas may require them when a door is replaced.

Hailstorms are common in parts of Texas. Hail can dent steel panels and crack windows, and thicker-gauge or insulated doors resist dents better than thin single-layer steel.

Our garage door replacement service covers Cameron (ZIP code 76520) and nearby towns including Rockdale (13.7 mi), Hearne (22.8 mi), Bartlett (26.9 mi) and Temple (27.5 mi). Call (833) 435-8883 to book a visit in Cameron.

Garage Door Replacement: frequently asked questions

How much does garage door replacement cost in Cameron, TX?

Garage Door Replacement typically costs $1,200-$5,000 including parts and labor, and usually takes 4-8 hours. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do garage door replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is garage door replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Texas or Cameron requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my garage door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the garage door is near the end of its life, replace it. A garage door typically lasts 15 to 30 years. If several panels are damaged, the door is rusted through or rotted, or parts are discontinued, replacing it is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Cameron, TX

Overhead Door Off-Track Garage Door Repair

Overhead Door traces its roots to C.G. Johnson, who invented the upward-acting garage door in 1921. The company builds residential and commercial doors and openers.

Typical $175-$450

Chamberlain Opener Circuit Board Replacement

Chamberlain is the retail line of The Chamberlain Group, sold at home centers. It uses the same Security+ 2.0 remote technology and myQ app as LiftMaster, so many accessories work with both brands.

Typical $175-$400

CHI Overhead Doors Garage Door Panel Replacement

CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Typical $300-$900

Wayne Dalton Weather Seal Replacement

Wayne Dalton is part of the Overhead Door Corporation. Many Wayne Dalton doors use the TorqueMaster spring system, with the springs sealed inside the torsion tube, so spring work needs TorqueMaster parts and a different procedure.

Typical $100-$300

Raynor Commercial Garage Door Repair

Repairs for commercial sectional, overhead and service doors.

Typical $250-$1,000

CHI Overhead Doors Torsion Spring Replacement

CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Typical $200-$450

Holmes Garage Door Extension Spring Replacement

Side-mounted extension springs replaced in matched pairs, with safety cables installed.

Typical $150-$350

Windsor Door Garage Door Installation

New steel, insulated, wood-look and carriage-style doors, measured and professionally installed.

Typical $1,200-$4,500

Steel Garage Door Repair

Dents, rust and bent sections on steel doors repaired or replaced.

Typical $150-$600

Holmes Garage Door Garage Door Roller Replacement

Worn steel or plastic rollers swapped for quiet, sealed nylon rollers.

Typical $150-$350

Clopay Garage Door Installation

Clopay is one of the largest residential garage door makers in North America, with lines such as Classic, Modern Steel, Coachman and Canyon Ridge. The model is usually printed on a label on the door's end stile, which helps us match replacement panels.

Typical $1,200-$4,500

Janus International Roll-Up Door Repair

Janus International is a major maker of roll-up doors for self-storage facilities.

Typical $150-$600

Garage door stuck, noisy or broken?

Talk to a garage door technician in Cameron, TX now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote